Angebot!

LHI Matek PDB-XPW mit Stromsensoren 140A und Bis-BEC pdb vier Zweige Verteiler UAV Flugregler

11,76 (as of 13. November 2017, 16:27) 9,66

Built-in 150A current module, and provides an XT60PW socket to facilitate the LiPo package power supply.
The PDB-XPW distributes the power of the LiPo components to four Ces and provides synchronous and DC regulated 5V output and linear regulated DC 12V for cameras, RC receivers, flight controllers, video transmitters, LED emitters, and so on.
2 oz. Copper, 4-layer & 2mm PCB. Built-in current sensor 150A

Auf Amazon ansehen

Beschreibung

What you will get
PDB-XPW* 1PC
XT60-PW * 1PC
M3 x12 * 4PCS
m3 x6+6* 4PCS
M3 nuts 8PCS

product specs
Input voltage range (3 S-5 S operating LiPo): 9-21 V DC
PDB: 4 x 35A
regulated 5 V and 12 V outputs
module current 150A
indicators LED power (5 V & 12 V outputs)

specification
Current Module
-150A
-3.3 V ADC
BEC 5 V output
-Designed for RC Receivers, Flight Controllers, OSD, and Servos.
-DC / DC synchronous buck regulator.
-voltage: 5.0 +/- 0.1VDC
– continuous current: 2 Amps (Max.2.5A 10 s / minute)
-Output Ripple: 40mV (VIn = 16V, VOut = V @ 2A load)
– short-circuit tolerant (5 seconds / minute)
-The battery should be 4 ~ 5 S LiPo (13 ~ 21 V DC)
-voltage: 12.0 +/- 0.3VDC
-Continuous current: 500mA (Max.0.8A 5S / minute)
– short-circuit tolerant (2 seconds / minute)
BEC 12 V @ 3 S LiPo
– output voltage = 3 S LiPo voltage-1 V

physical
-mounting: 30.5×30.5mm, Φ3mm
-dimensions: 36x50x4mm (w / o XT60PW), 36x58X10.5mm (w / XT60PW)
Weight: 7.0g (w / o XT60PW), 11g (w / XT60PW)

Built-in 150A current module, and provides an XT60PW socket to facilitate the LiPo package power supply.
The PDB-XPW distributes the power of the LiPo components to four Ces and provides synchronous and DC regulated 5V output and linear regulated DC 12V for cameras, RC receivers, flight controllers, video transmitters, LED emitters, and so on.
2 oz. Copper, 4-layer & 2mm PCB. Built-in current sensor 150A
Total 4 pairs ESC welding guides are suitable for type X frame 5 V & 12 V Output LED indicators & Short circuit tolerant
BEC 12 V outputprojected for TX Video or FPV camera with linear regulator.